Skip to main content
Version: v2.16.x LTS

Troubleshooting Zowe API Mediation Layer

Troubleshooting Zowe API Mediation Layer

As an API Mediation Layer user, you may encounter problems with how the API ML functions. This article presents known API ML issues and their solutions.

note

To troubleshoot errors or warnings that can occur when configuring certificates, see the article Troubleshooting certificate configuration.

Install API ML without Certificate Setup

For testing purposes, it is not necessary to set up certificates when configuring the API Mediation Layer. You can configure Zowe without certificate setup and run Zowe with verify_certificates: DISABLED.

Important: For production environments, certificates are required. Ensure that certificates for each of the following services are issued by the Certificate Authority (CA) and that all keyrings contain the public part of the certificate for the relevant CA:

  • z/OSMF
  • Zowe
  • The service that is onboarded to Zowe

Enable API ML Debug Mode

Use debug mode to activate the following functions:

  • Display additional debug messages for API ML
  • Enable changing log level for individual code components
  • Gather atypical debug information

When on z/OS, API ML log messages are written to the STC job log.

Important: We highly recommend that you enable debug mode only when you want to troubleshoot issues. Disable debug mode when you are not troubleshooting. Running in debug mode while operating API ML can adversely affect its performance and create large log files that consume a large volume of disk space.

Follow these steps:

  1. Open the file zowe.yaml.

  2. For each component, find the components.*.debug parameter and set the value to true:

     components.gateway.debug: true

    By default, debug mode is disabled, and the components.*.debug is set to false.

  3. Restart Zowe™.

    You enabled debug mode for the API ML core services (API Catalog, API Gateway and Discovery Service).

  4. (Optional) Reproduce a bug that causes issues and review debug messages. If you are unable to resolve the issue, create an issue here.

Change the Log Level of Individual Code Components

You can change the log level of a particular code component of the API ML internal service at run time.

Follow these steps:

  1. Enable API ML Debug Mode as described in Enable API ML Debug Mode. This activates the application/loggers endpoints in each API ML internal service (Gateway, Discovery Service, and Catalog).

  2. List the available loggers of a service by issuing the GET request for the given service URL:

    GET scheme://hostname:port/application/loggers
    • scheme

      Specifies the API ML service scheme (http or https)

    • hostname

      Specifies the API ML service hostname

    • port

      Specifies the TCP port where API ML service listens on. The port is defined by the configuration parameter MFS_GW_PORT for the Gateway, MFS_DS_PORT for the Discovery Service (by default, set to gateway port + 1), and MFS_AC_PORT for the Catalog (by default, set to gateway port + 2).

    Note: For the Catalog you can list the available loggers by issuing a GET request for the given service URL in the following format:

    GET [gateway-scheme]://[gateway-hostname]:[gateway-port]/apicatalog/api/v1/application/loggers

    Tip: One way to issue REST calls is to use the http command in the free HTTPie tool: https://httpie.org/.

    Example:

    HTTPie command:
    http GET https://lpar.ca.com:10000/application/loggers

    Output:
    {"levels":["OFF","ERROR","WARN","INFO","DEBUG","TRACE"],
    "loggers":{
    "ROOT":{"configuredLevel":"INFO","effectiveLevel":"INFO"},
    "com":{"configuredLevel":null,"effectiveLevel":"INFO"},
    "com.ca":{"configuredLevel":null,"effectiveLevel":"INFO"},
    ...
    }
    }
  3. Alternatively, extract the configuration of a specific logger using the extended GET request:

    GET scheme://hostname:port/application/loggers/{name}
    • {name}

      Specifies the logger name

  4. Change the log level of the given component of the API ML internal service. Use the POST request for the given service URL:

    POST scheme://hostname:port/application/loggers/{name}

    The POST request requires a new log level parameter value that is provided in the request body:

    {

    "configuredLevel": "level"

    }
    • level

      Specifies the new log level: OFF, ERROR, WARN, INFO, DEBUG, TRACE

    Example:

    http POST https://hostname:port/application/loggers/org.zowe.apiml.enable.model configuredLevel=WARN

Gather atypical debug informaiton

  • ZWE_configs_debug
    This property can be used to unconditionally add active debug profiles.

For more information, see Adding active profiles in the Spring documentation.

  • ZWE_configs_sslDebug
    This property can be used to enable the SSL debugging. This property can also assist with determining what exactly is happening at the SSL layer.

This property uses the -Djavax.net.debug Java parameter when starting the Gateway component. By setting ZWE_configs_sslDebug to ssl, all SSL debugging is turned on. The ZWE_configs_sslDebug parameter also accepts other values that can enable a different level of tracing.

For more information, see the article Debugging Utilities in the IBM documentation.

note

This property can also be enabled for other API ML components.

Debug and Fix Common Problems with SSL/TLS Setup

Review tips described in the blog post Troubleshooting SSL/TLS setup with Zowe Certificate Analyzer to find out how you can use the Zowe Certificate Analyzer to address the following common issues with SSL/TLS setup:

  • How to verify if the API ML server certificate is trusted by your service
  • How to get a CA certificate in the correct format
  • How to perform a TLS handshake with debug logs
  • How to debug remote services
  • How to enable mutual authentication using a client certificate
  • How to add a trusted certificate to a SAF Key ring

Known Issues

API ML stops accepting connections after z/OS TCP/IP stack is recycled

Symptom:

When z/OS TCP/IP stack is restarted, it is possible that the internal services of API Mediation Layer (Gateway, Catalog, and Discovery Service) stop accepting all incoming connections, go into a continuous loop, and write numerous error messages in the log.

Sample message:

The following message is a typical error message displayed in STDOUT:

2018-Sep-12 12:17:22.850. org.apache.tomcat.util.net.NioEndpoint -- Socket accept failed java.io.IOException: EDC5122I Input/output error.

.at sun.nio.ch.ServerSocketChannelImpl.accept0(Native Method) ~.na:1.8.0.
.at sun.nio.ch.ServerSocketChannelImpl.accept(ServerSocketChannelImpl.java:478) ~.na:1.8.0.
.at sun.nio.ch.ServerSocketChannelImpl.accept(ServerSocketChannelImpl.java:287) ~.na:1.8.0.
.at org.apache.tomcat.util.net.NioEndpoint$Acceptor.run(NioEndpoint.java:455) ~.tomcat-coyote-8.5.29.jar!/:8.5.29.
.at java.lang.Thread.run(Thread.java:811) .na:2.9 (12-15-2017).

Solution:

Restart API Mediation Layer.

Tip: To prevent this issue from occurring, it is strongly recommended not to restart the TCP/IP stack while API ML is running.

SEC0002 error when logging in to API Catalog

SEC0002 error typically appears when users fail to log in to API Catalog. The following image shows the API Catalog login page with the SEC0002 error.

SEC0002 Error

The error is caused by failed z/OSMF authentication. To determine the reason authentication failed, open the ZWESLSTC joblog and look for a message that contains ZosmfAuthenticationProvider. The following is an example of the message that contains ZosmfAuthenticationProvider:

2019-08-05 11:25:03.431 ERROR 5 --- .0.0-7552-exec-3. c.c.m.s.l.ZosmfAuthenticationProvider    : Can not access z/OSMF service. Uri 'https://ABC12.slv.broadcom.net:1443' returned: I/O error on GET request for "https://ABC12.slv.broadcom.net:1443/zosmf/info": ... 

Check the rest of the message, and identify the cause of the problem. The following list provides the possible reasons and solutions for the z/OSMF authentication issue:

Connection refused

In the following message, failure to connect to API Catalog occurs when connection is refused:

Connect to ABC12.slv.broadcom.net:1443 .ABC12.slv.broadcom.net/127.0.0.1. failed: EDC8128I Connection refused.; nested exception is org.apache.http.conn.HttpHostConnectException: 

The reason for the refused connection message is either invalid z/OSMF configuration or z/OSMF being unavailable. The preceding message indicates that z/OSMF is not on the 127.0.0.1:1443 interface.

Solution:

Configure z/OSMF

Make sure that z/OSMF is running and is on 127.0.0.1:1443 interface, and try to log in to API Catalog again. If you get the same error message, change z/OSMF configuration.

Follow these steps:

  1. Locate the z/OSMF PARMLIB member IZUPRMxx.

    For example, locate IZUPRM00 member in SYS1.PARMLIB.

  2. Change the current HOSTNAME configuration to HOSTNAME('*').

  3. Change the current HTTP_SSL_PORT configuration to HTTP_SSL_PORT('1443').

    Important! If you change the port in the z/OSMF configuration file, all your applications lose connection to z/OSMF.

For more information, see Syntax rules for IZUPRMxx.

If changing the z/OSMF configuration does not fix the issue, reconfigure Zowe.

Follow these steps:

  1. Open .zowe_profile in the home directory of the user who installed Zowe.
  2. Modify the value of the ZOWE_ZOSMF_PORT variable.
  3. Reinstall Zowe.

Missing z/OSMF host name in subject alternative names

In following message, failure to connect to API Catalog is caused by a missing z/OSMF host name in the subject alternative names:

Certificate for <ABC12.slv.broadcom.net> doesn't match any of the subject alternative names: ..; nested exception is javax.net.ssl.SSLPeerUnverifiedException: Certificate for <ABC12.slv.broadcom.net> doesn't match any of the subject alternative names: ..

Solutions:

Fix the missing z/OSMF host name in subject alternative names using the following methods:

Note: Apply the insecure fix only if you use API Catalog for testing purposes.

Secure fix

Follow these steps:

  1. Obtain a valid certificate for z/OSMF and place it in the z/OSMF keyring. For more information, see Configure the z/OSMF Keyring and Certificate.
  2. Re-create the Zowe keystore by deleting it and re-creating it. For more information, see Zowe certificate configuration overview and the corresponding sub-articles in this section. The Zowe keystore directory is the value of the KEYSTORE_DIRECTORY variable in the zowe.yaml file that is used to launch Zowe.

Insecure fix

Follow these steps:

  1. Re-create the Zowe keystore by deleting it and re-creating it.
  2. In the zowe-setup-certificates.env file that is used to generate the keystore, ensure that the property VERIFY_CERTIFICATES and NONSTRICT_VERIFY_CERTIFICATES are set to false.

Important! Disabling VERIFY_CERTIFICATES or NONSTRICT_VERIFY_CERTIFICATES may expose your server to security risks. Ensure that you contact your system administrator before disabling these certificates and use these options only for troubleshooting purposes.

Invalid z/OSMF host name in subject alternative names

In the following message, failure to connect to API Catalog is caused by an invalid z/OSMF host name in the subject alternative names:

Certificate for <ABC12.slv.broadcom.net> doesn't match any of the subject alternative names: [abc12.ca.com, abc12, localhost, abc12-slck, abc12-slck.ca.com, abc12-slck1, abc12-slck1.ca.com, abc12-slck2, abc12-slck2.ca.com, usilabc12, usilabc12.ca.com]; 
nested exception is javax.net.ssl.SSLPeerUnverifiedException: Certificate for <ABC12.slv.broadcom.net> doesn't match any of the subject alternative names: [abc12.ca.com, abc12, localhost, abc12-slck, abc12-slck.ca.com, abc12-slck1, abc12-slck1.ca.com, abc12-slck2, abc12-slck2.ca.com, usilabc12, usilabc12.ca.com]

Solutions:

Fix the invalid z/OSMF host name in the subject alternative names using the following methods:

Request a new certificate

Request a new certificate that contains a valid z/OSMF host name in the subject alternative names.

Re-create the Zowe keystore

Re-create the Zowe keystore by deleting it and re-creating it. For more information, see Configuring PKCS12 certificates. The Zowe keystore directory is the value of the KEYSTORE_DIRECTORY variable in the zowe.yaml file that is used to launch Zowe.

API ML throws I/O error on GET request and cannot connect to other services

Symptom:

The API ML services are running but they are in the DOWN state and not working properly. The following exceptions can be found in the log: java.net.UnknownHostException and java.net.NoRouteToHostException.

Sample message:

See the following message for full exceptions.

org.springframework.web.client.ResourceAccessException: I/O error on GET request for "https://USILCA32.lvn.broadcom.net:7553/eureka/apps/apicatalog": USILCA32.lvn.broadcom.net; nested exception is java.net.UnknownHostException: USILCA32.lvn.broadcom.net

.at org.springframework.web.client.RestTemplate.doExecute(RestTemplate.java:732) ~Ýspring-web-5.0.8.RELEASE.jar!/:5.0.8.RELEASE¨

.at org.springframework.web.client.RestTemplate.execute(RestTemplate.java:680) ~Ýspring-web-5.0.8.RELEASE.jar!/:5.0.8.RELEASE¨

.at org.springframework.web.client.RestTemplate.exchange(RestTemplate.java:600) ~Ýspring-web-5.0.8.RELEASE.jar!/:5.0.8.RELEASE¨

.at com.ca.mfaas.apicatalog.services.initialisation.InstanceRetrievalService.queryDiscoveryForInstances(InstanceRetrievalService.java:276) Ýclasses!/:na¨

.at com.ca.mfaas.apicatalog.services.initialisation.InstanceRetrievalService.getInstanceInfo(InstanceRetrievalService.java:158) Ýclasses!/:na¨

.at com.ca.mfaas.apicatalog.services.initialisation.InstanceRetrievalService.retrieveAndRegisterAllInstancesWithCatalog(InstanceRetrievalService.java:90) Ýclas

….

main¨ o.a.http.impl.client.DefaultHttpClient : I/O exception (java.net.NoRouteToHostException) caught when connecting to {s}->https://localhost:7553: EDC8130I Host cannot be reached. (Host unreachable)

main¨ o.a.http.impl.client.DefaultHttpClient : Retrying connect to {s}->https://localhost:7553

Solution:

The Zowe started task needs to run under a user with sufficient privileges. As a workaround, you can try to run the started task under the same user ID as z/OSMF (typically IZUSVR).

The hostname that is displayed in the details of the exception is a valid hostname. You can validate that the hostname is valid by using ping command on the same mainframe system. For example, ping USILCA32.lvn.broadcom.net. If it is valid, then the problem can be caused by insufficient privileges of your started task that is not allowed to do network access.

You can fix it by setting up the security environment as described in the Zowe documentation.